SENIOR ELEMENTARY TEACHER SET PAST PAPERS AND SYLLABUS
چار آپشن میں سے کسی ایک پر کلک کرنے سے جواب سرخ ہو جائے گا۔
الکائل بینزین کو بینزوئک ایسڈ میں تبدیل کرنے کے لیے کیا استعمال ہوتا ہے؟
- NaOH
- KMnO₄, acidified
- H₂/Ni
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Alkyl benzene undergoes side-chain oxidation to form benzoic acid.
- A strong oxidizing agent is required for this conversion.
- Potassium permanganate (KMnO₄) in acidic medium is commonly used.
- It converts the alkyl side chain completely into –COOH group.
- Example: Toluene → Benzoic acid.
Last verified on 20-05-2026
گیبریل فثالیمائڈ سنتھیسس کس کے لیے استعمال ہوتا ہے؟
- 1° amine
- 2° amine
- 3° amine
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Gabriel phthalimide synthesis is a method to prepare amines.
- It involves alkylation of phthalimide followed by hydrolysis.
- This method specifically gives only primary amines.
- It avoids formation of secondary and tertiary amines.
- Therefore, it is a selective and controlled preparation method.
Last verified on 20-05-2026
- r = [A]¹[B]²
- r = [A]²[B]¹
- r = [A]²[B]⁰
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Rate law shows how reaction rate depends on reactant concentrations.
- If rate does NOT change when B changes, then B has no effect on rate.
- This means the order of reaction with respect to B is zero.
- So B appears with exponent 0 in the rate law.
- Therefore, rate depends only on A.
Last verified on 20-05-2026
نائٹرو بینزین کو اینیلین میں تبدیل کرنے کے لیے کون سا ری ایجنٹ استعمال ہوتا ہے؟
- H₂/Ni
- Fe/HCl
- KMnO₄
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Nitrobenzene (C₆H₅NO₂) is reduced to aniline (C₆H₅NH₂).
- Reduction requires removal of oxygen and addition of hydrogen.
- Common lab method uses metals in acidic medium.
- Iron (Fe) with hydrochloric acid (HCl) is widely used (Béchamp reduction).
- It efficiently converts nitro group (–NO₂) to amino group (–NH₂).
Last verified on 20-05-2026
اینڈوتھرمک ری ایکشن کب خود بخود ہوتا ہے؟
- ΔG = +ve
- ΔG = 0
- ΔG = −ve
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Spontaneity of any reaction depends on Gibbs free energy (ΔG).
- Endothermic reaction absorbs heat, but can still be spontaneous.
- The key condition for spontaneity is that free energy must decrease.
- This happens when system moves to a more stable state.
- So ΔG must be negative.
Last verified on 20-05-2026
کون سا کوانٹم نمبر سیٹ درست نہیں ہے؟
- n = 3, l = 3, m = 2, s = 1/2
- n = 4, l = 2, m = 0, s = -1/2
- n = 3, l = 2, m = 1, s = +1/2
- n = 2, l = 1, m = 0, s = -1/2
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Quantum numbers must follow fixed rules.
- For a given principal quantum number n, azimuthal quantum number l = 0 to (n−1).
- If n = 3, possible l values are 0, 1, 2 only.
- So l = 3 is not allowed for n = 3.
- Therefore that set is invalid.
Last verified on 20-05-2026
- 10
- 11
- 12
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
For l=2, it represents the d-subshell.
A d-subshell has 5 orbitals, and each orbital can hold 2 electrons.
So total electrons = 5 × 2 = 10.
Last verified on 20-05-2026
- O₂
- H₂
- CO₂
- N₂
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Effusion is the escape of gas molecules through a tiny hole.
- According to Graham’s law, rate of effusion ∝ 1/√molar mass.
- Lighter gases effuse faster than heavier gases.
- Among given options, hydrogen has the lowest molar mass (H₂ = 2 g/mol).
- Therefore, it moves and escapes the fastest.
Last verified on 19-05-2026
مائع–بخار توازن میں بخارات کے دباؤ میں اضافہ کس سے ہوگا؟
- Increase pressure
- Decrease temperature
- Increase temperature
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Vapour pressure depends on the tendency of liquid molecules to escape into vapour.
- When temperature increases, molecules gain kinetic energy.
- More molecules escape from liquid phase into vapour phase.
- This increases the vapour pressure at equilibrium.
- Pressure applied from outside does not increase vapour pressure directly.
Last verified on 20-05-2026
- Hydrogen bonding
- Ionic bonding
- Covalent bonding
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Boiling point depends on intermolecular forces.
- Stronger forces require more energy to separate molecules.
- Water (H₂O) forms strong hydrogen bonding between molecules.
- H₂S has only weak van der Waals (no effective hydrogen bonding).
- Therefore, water has a much higher boiling point.
Last verified on 20-05-2026