PPSC BUILDING INSPECTOR PAST PAPER 07-06-2026
پیپر میں جانے سے
پہلے یہ سوالات و سلیبس ایک بار ضرور پڑھ کر جائیں
PPSC
25 years Past Papers Click here
چار آپشن میں سے کسی ایک پر کلک کرنے سے جواب سرخ ہو جائے گا۔
پینٹ میں را اُمبر کس رنگ کے لیے استعمال کیا جاتا ہے؟
- Grey
- Blue
- Red
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Grey is obtained using Raw Umber in paint mixtures.
- Raw umber is a natural earth pigment containing iron oxide and manganese.
- It is used to reduce brightness and create muted, earthy shades.
- Mixing raw umber with white can produce greyish-brown or neutral grey tones.
- It is commonly used in artistic and decorative painting.
Last verified on 04-08-2026
کمزور برداشت والی مٹی میں بھاری اسٹیل ڈھانچوں کے لیے استعمال ہونے والی خاص قسم کی علیحدہ بنیاد کون سی ہے؟
- Grillage
- Raft
- Inverted arch
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- A Grillage Foundation is a special type of isolated footing.
- It is used for heavily loaded steel structures.
- It is suitable where the bearing capacity of the soil is poor.
- It spreads heavy column loads over a larger area.
- Grillage foundations are commonly used for steel columns and industrial structures.
Last verified on 04-08-2026
پائپ لائن کی جانچ کے لیے سب سے زیادہ کون سا ٹیسٹ استعمال کیا جاتا ہے؟
- Smoke test
- Hydraulic test
- Air test
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- The Hydraulic test is the most commonly used method for testing pipelines.
- It checks the pipeline for leakage and strength under water pressure.
- The pipeline is filled with water and pressurized above its normal operating pressure.
- Any pressure drop or leakage indicates a defect.
- Hydraulic testing is widely used for water supply and pressure pipelines.
Last verified on 04-08-2026
مندرجہ ذیل میں سے کس مادے کی حرارتی مزاحمت سب سے زیادہ ہوتی ہے؟
- Marble
- Glass
- Wood
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- Wood has the highest thermal resistance among the given materials.
- Thermal resistance is the ability of a material to resist the flow of heat.
- Wood is a good thermal insulator due to its low thermal conductivity.
- Materials with higher thermal resistance are commonly used for insulation.
Last verified on 04-08-2026
سیدھی پائپ لائن میں سیال کے بہاؤ کو بند کرنے کے لیے کس قسم کا کاک استعمال کیا جاتا ہے؟
- Three-way
- Single-way
- Two-way
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- A Single-way cock is used to stop or allow the flow of fluid in a straight pipe.
- It controls the flow through a single passage.
- It is commonly used in water supply and plumbing systems.
- It allows easy opening and closing of the pipeline.
- It is used where only one flow path is required.
Last verified on 04-08-2026
سنک عام طور پر کہاں نصب کیا جاتا ہے؟
- Lavatory
- Kitchen
- Almirah
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- A sink is commonly installed in the kitchen.
- It is used for washing utensils, vegetables, and food items.
- Kitchen sinks are connected to the water supply and drainage system.
- They are usually made of stainless steel, ceramic, or granite.
- A wash basin is generally installed in a lavatory (bathroom).
Last verified on 04-08-2026
دروازے کے فریم کے اوپری افقی حصے کو کیا کہتے ہیں؟
- Post
- Head jamb
- Stile
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- The Head jamb is the upper horizontal member of a door frame.
- It connects the two side jambs of the frame.
- It supports the top of the door opening.
Additional information:
- The stile is the vertical member of the door shutter.
- A post is a vertical structural member.
Last verified on 04-08-2026
- 6°
- 4°
- 5°
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
In surveying, degree of curve is related to radius by:
For arc definition with 20 m chord:
Degree of curve D = 1145.92 / R (R in meters)
Given R = 430 m
D = 1145.92 / 430
D = 2.665° ≈ 2.67°
For arc definition with 30 m arc:
D = 1718.87 / R = 1718.87 / 430 = 4.00°
The most commonly used formula in many countries with 30 m arc gives:
D ≈ 4°
Last verified on 04-08-2026
- 10
- 100
- 1000
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
ppm = parts per million = mg of substance per liter of water
Given:
Salt = 100 mg
Water = 1 liter
For water, 1 liter ≈ 1,000,000 mg
Concentration in ppm = (mg of salt / liters of water)
Concentration in ppm = 100 mg / 1 L = 100 ppm
Last verified on 04-08-2026
وہ ٹینک جس میں تلچھٹ کا عمل ہوتا ہے، اسے عام طور پر کیا کہا جاتا ہے؟
- Settling tank
- Clarifier
- Both A and B
- None of these
اس سوال کو وضاحت کے ساتھ پڑھیں
Explanation
- A tank in which sedimentation takes place is called a Settling Tank or Clarifier.
- Both terms are commonly used in water and wastewater treatment.
- Suspended solids settle at the bottom due to gravity.
- The clarified water flows out from the top.
- Sedimentation improves the efficiency of the treatment process.
Last verified on 04-08-2026